High power LED DMX 512 Controller (10A each channel)

 1. the performance parameters:

• power supply input: 12V - 24VDC
• the output current: 3 * 10A, maximum 15A per channel
• the output grayscale: 256
• Number of channels: 3-way

• 256 smooth dimming.
• the decoder has a test mode.
• high power output.
• power indicator and DMX512 signal indication
• comes with DMX512 signal amplification,No need signal amplifier 

3. Decoder address setting

Connection shown in Figure 1, each DMX512 decoder occupies 3 DMX address, by coding switch to set address mode: 10 bit A code switch to play down to the ON state, 1-9 is set DMX start address binary numeric code switch, the first one is the lowest position, the first nine highest bits of the address can be set to 511 yards. DMX start address code switches 1-9 = The bit value of the sum of the coding switch down, get the bit-bit value; coding switch up, the position of the bit is 0. For example: the DMX start??? Imitation Xu comb? 37, shown in Figure 2, the encoding of the first 6,3,1 position switch dial down, the rest position for the up, this time 1-9 bit code switch the sum of 32-bit value +4 +1, that is, DMX512 start address 37 (R for the first starting channel, G for the second channel, B is the third channel), and the next two channels, respectively, corresponding to 38 and 39 (corresponding to the position of the table option DIP). By DIP switch selection of the channel address:

In DMX decode mode, when receiving the control signal, the back light flashes. No reception or non-DMX decode mode, the light does not shine.

4. Other features instructions

1, the test function:

DIP switch No. 10 is "A", for the function keys. A = ON (down) when DMX512 decoder to receive DMX512 signal.

A = OFF (up) when the decoder test function (R channel then red, G green channel access, B-channel access blue light), as follows:

1-9 Switch OFF: lights Quanmie

Switch 1 =ON: Red

Switch 2 = ON: Green

Switch 3 = ON: Blue

Switch 4 = ON: Yellow

Switch 5 = ON: Purple

Switch 6 = ON: cyan

Switch 7 = ON: White

Switch 8 = ON: colorful jump (8 stall speed)

Switch 9 = ON: full-color gradient (8 files speed)

2, transition, transition effects speed selection

Test function in the decoder, the switch 8 = ON is a colorful transition effects when switching 9 = ON is a full-color gradient effect, every effect has a 8 stall speed selection:

1-7 switch = OFF: 0 stall speed

Switch 1 = ON: 1 stall speed

Switch 2 = ON: 2 stall speed

Switch 3 = ON: 3 stall speed

Switch 4 = ON: 4 stall speed

Switch 5 = ON: 5 stall speed

Switch 6 = ON: 6 stall speed

Switch 7 = ON: 7 stall speed (the slowest rate of change)

When multiple switches are ON, the value of a large switch prevail.