RGY Beam 280mW Show Laser Light For Disco Bar,DJ LOVER

 280MW RGY Beam Show Laser Light For DISCO BAR

This item is every DJ's Lover, best selling  in Europe market now!

Specifications:

laser Power: 80mw green laser, 200mw red laser, 280mw in total

Scanner: Step-moto scanner, big angle scanning

Working Mode:Sound active,auto-beam, DMX 512, master/slave

Graphics & Effect: More than 100 patterns, over 500 effects.

Interface: 3 pin XLR jack for DMX or master/slave linking

Size: 305*190*100mm

Weight:4.5kg

Features:

Including 3 color effect as red green and yellow, it can combine to creat rich and dynamic patterns at same time. 

Including 4 working modes as DMX512, sound active, auto-beam, master/slave for different applications.

This item has 9channels to control in DMX mode. Also it has BLACK OUT function. The item will shut off if no DMX512 signal.

Design according to security and good performance, safer to human and environment. Master/ slave mode, DMX 512 mode, will shut off laser automatically without trigger signal.

Use diode-pumped solid state green laser, stable output and long working life.

Operation

Sound Active:

The unit will react to the low frequencies of music via the internal microphone. Adjust the audio sensitivity knob on the back of the unit to make the unit more or less sensitive in sound active.The panel has LED indicating for sound active.So for sound mode,The change of the laser pattern is controlled by sound, that is, the rhythm of the sound control the effect of the changing laser pattern.

Auto mode:

Auto cycles the built-in programs without being controlled externally. It has no laser OFF.

DMX Control:

Use standard XLR microphone cable chain your units together via the XLR connector on the rear of the units. For longer cable runs we suggest a terminator at the last fixture.Assign a DMX address to each the unit using dipswitches, see the "DMX Address Quick Reference Char".